Tennis Court Resurfacing , Four ( 4 ) Courts

2026-11-03

Tennis Court Resurfacing General Requirements : • Court Cleaning / Preparation - The contractor shall sand , scrape and / or power wash the entire court surface to remove dirt , stains , debris , mildew , loose surfacing material and other materials that may impact the adhesion of the acrylic coatings . • Low Spot / Birdbath Repair - Prior to the application of the court surface system , the entire court area shall be water flooded and allowed to drain for sixty minutes . At that time the surface shall be inspected for depressions , and areas holding water deeper than 1 / 16 inch shall be clearly marked to establish the birdbath outline . Once they are completely dried , the outlined area shall be patched and leveled using acrylic court leveling material . • Crack Repair ( typical for small cracks ) - The contractor shall route , air blow , and clean all structural cracks in the pavement . All cracks will fill their entire depth with acrylic patch binder material . Multiple applications may be necessary . The contractor shall feather and sand all crack repairs to be even with the adjacent court surface . • Manufactured Crack Repair ( If recommended is typically used on cracks > 1 ”) – The contractor shall overlay 1 , 900 of linear feet of pavement cracks with a manufactured crack repair system in accordance with the manufacturer ’ s instructions and recommendations . • Resurfacer Coats – The contractor shall provide and install 1 coat of acrylic resurfacer . • Color Coats – The contractor shall provide and install 2 coat ( s ) of acrylic color unless otherwise specified by the Owner , speed of play shall be “ medium .”

Arkansas

2026-03-27