Truck Garage Floor

2026-11-03

The scope of work involves the repair and resurfacing of approximately 14 , 293 sq . feet of concrete floor in the Walker DPW truck garage . The project will include all necessary materials , labor , and equipment to complete the work in accordance with the specifications outlined below : 1 . Remove and dispose of any debris resulting from the project . 2 . Ensure safe and clear access for all workmen and equipment . 3 . Perform moisture testing and assess the concrete ' s condition to identify any issues that need addressing . 4 . Clean the floor to remove all dirt , oil , and existing coatings or sealers . 5 . Use a diamond grinder or shot blaster to prep surface . 6 . Inspect and repair any cracks or spalling areas with appropriate materials 7 . Ensure all expansion and control joints are prepared properly . 8 . Ensure floor is properly prepped with a quality primer . ( If required ) 9 . Apply an appropriate heavy - duty coating such as a polyaspartic or high - solids epoxy . 10 . Ensure correct thickness throughout the entire floor . Minimum of 40 mil . 11 . Ensure floor has a non - slip finish . 12 . Ensure floor is finished with a topcoat to protect it from chemicals such as oil , salt and chlorides . 13 . Perform a thorough inspection of the floor repair and resurfacing at various stages of the project . 14 . Ensure all work complies with local building codes and manufacturer ’ s product specifications .

MITN

2026-04-29