USCGC Sturgeon Bay MPCMS Grooming

2026-11-03

This is for informational purposes only . This has been awarded VIA JOTFOCUNITED STATES COAST GUARDCUTTER STURGEON BAY ( WTGB - 109 ) ENGINEERING DEPARTMENTScope of WorkMPCMS Grooming – 140 - ft Icebreaking TugPOP : 05 - 09 JAN 20261 . PurposeProvide contractor services to inspect , groom , and verify proper operation of the Machinery Plant Control – Monitoring System ( MPC - MS ) aboard Coast Guard Cutter STURGEON BAY ( WTGB - 109 ). All work shall support operational readiness and be conducted IAW Coast Guard engineering policy and cutter requirements . 2 . Required Contractor Actions • Conduct a full - system inspection of MPC - MS hardware , PLCs , HMIs , sensors , and all communication paths .• Perform grooming tasks including reseating connectors , tightening terminations , correcting wiring discrepancies , eliminating false alarms , and ensuring proper labeling .• Verify correct operation of monitored propulsion systems , auxiliary equipment , tank levels , steering / hydraulic readouts , and alarm annunciation .• Calibrate temperature , pressure , and level sensors using certified and traceable calibration equipment .• Install approved software / firmware updates with PL / EPO authorization . 3 . Testing Requirements • Conduct operational testing across propulsion , electrical generation , auxiliary systems , and safety monitoring .• Validate alarm setpoints , annunciation , communications integrity , and correct event logging .• Confirm accurate data reporting to all MPCMS HMIs and operator stations . 4 . Deliverables • Written MPCMS Grooming Report detailing inspections performed , discrepancies identified , corrective actions , and future recommendations .• Calibration certificates and updated system documentation , as applicable .• List of replaced components including part numbers and serial numbers . 5 . CoordinationContractor shall coordinate all work directly with the Engineer Petty Officer ( EPO ), ensuring system outages are scheduled and cutter readiness is maintained . 6 . Completion CriteriaWork will be considered complete when :• No unresolved MPCMS faults remain • All alarms function properly • All calibrated sensors meet required tolerances • Updated documentation is submitted • EPO signs off on system performance7 . UNIT POC : MKCM Thaddeus BrandtEngineer Petty OfficerCGC Sturgeon BAY85 PORT TERMINAL BLVD , SLIP 3BAYONNE , NJ 07002US201 - 912 - 7910

New Jersey

2026-04-29