Water Main Installation & Hydrant Improvements

2026-11-03

The Contractor shall provide all labor , materials , equipment , excavation , installation , testing , and restoration necessary to complete the following work : A . Excavation ● Excavate approximately 400 linear feet of existing water main from the Bonnie View Ave water main to the existing Solomone Rd Copper line ( near fire hydrant on Mill St .) ● Protect adjacent utilities and structures . ● Provide trenching , bedding , and excavation protection systems as required . ● Remove and dispose of existing piping where required . B . Installation of New 4 ” Water Main ● Furnish and install approximately 400 linear feet of new 4 - inch water main . ● Install pipe from Bonnie View Ave water man to existing Solomone Rd copper water line . ● Provide all fittings , valves , thrust blocks , restraints , and accessories required for a complete installation . ● Provide pressure testing , flushing , and disinfection per NYS water system standards . ● Install new water main in accordance with NYS Department of Health Rural Water Supply Standards and AWWA C600 installation standards . ● Provide minimum 5 ft cover over water main except at stream crossing where insulated pipe shall be installed . C . Stream Crossing Installation ● Furnish and install new 4 - inch insulated water main for stream crossing ● Provide structural support for pipe as necessary . ● Provide insulation suitable for freeze protection . D . Valve Installations Contractor shall furnish and install the following valve as part of the base scope : ● One ( 1 ) new isolation valve at the connection point where the new 4 " water main ties into the existing water main on Bonneview Street . Valves shall include all required fittings , valve boxes , and operating hardware . E . Fire Hydrant Installation ● Furnish and install one ( 1 ) new fire hydrant including : ○ Hydrant assembly ○ Hydrant tee connection ○ Isolation valve ○ Hydrant lead ○ Thrust blocks ● Install hydrant in accordance with municipal water system standards . F . Service Connections ● Furnish and install three ( 3 ) service taps from the new water main . ● Install service lines to the edge of roadway and connect to existing services where required . ● Provide corporation stops , curb stops , and curb boxes .

New York

2026-05-05