Welding Booth

2026-11-03

Welding Booths • 6x6 Welding Booths • Approximately 96 ” tall , total height • Sheet metal stop between 12 ” and 24 ” from floor so its easy to sweep underneath . Specify exact measurement . • Minimum 12 ga panels • Powder coat painted with color selected by HSD • On booths labeled in red must have a shelf on the left side able to support 60lbs and measure 12 ” away from wall and 24 ” long . Shelf must be bolted . This shelf will hold Lincoln V276 welder . Exact dimensions are 13 . 6 ” Hx9 ” Wx20 . 25 ” D . Must have tabs on shelf to prevent from falling off . 16 Booths • Strip Curtains are to be fastened to the opening of each booth in header mount . Curtain hanger must be made of metal . Must have 50 % overlap . Color must be specified . Curtain should be 12 ” from floor to match the side openings . Must be constructed of heavy duty material . Specify color options and thickness . • Each welding booth must have a mounting bracket for fume extraction arm located above the welding booth in the rear right corner of the booth . Bracket must be strong enough to hold the fume extraction arm independently and need no additional support . Bracket must be compatible with Micro Air SCA 607 Fume extraction arms . • Adjustable feet for leveling with hole to secure to floor . • Powder coated . List color options . • Booth shall have options included to hold mig gun , J hook to hold helmet , adjustable shelf with 100 # capacity ( run the width of the booth on the middle panel ), and jig holder to hold metal while welding located on the right panel . Jig holder must have options to move to multiple heights and articulate .

Missouri

2026-04-29